Safety; Disclaimer - ROBOTIQ AX20 Manual

2. Safety

2.1. Disclaimer

The intent of this section is to provide general guidelines for the safe use of the Robotiq Palletizing Solution.
Always follow local regulations.
The installer is responsible for the safe installation and commissioning of the Palletizing Solution.
Robotiq accepts no liability for damage, injury or any legal responsibility incurred directly or indirectly from the use of this product.
The user (installer and operator) shall observe safe and lawful practices including but not limited to those set forth in this
document.
The terms user, operator and installer, refer to anyone responsible for any of the following operations on the Robotiq Palletizing
Solution:
Installation
l
Control
l
Maintenance
l
Inspection
l
Calibration
l
Programming
l
Decommissioning.
l
The present section is based on the following international standards and technical specifications:
ISO 10218-1:2011 : Safety Requirements For Industrial Robots - Robots
l
ISO 10218-2:2011 : Safety Requirements For Industrial Robots - Robots Systems and Integrators
l
IEC 60204-1 : Safety Of Machinery - Electrical Equipment Of Machines
l
ISO/TS 15066:2016 : Robots and robotic devices — Collaborative robots
l
This manual details the components of the Robotiq Palletizing Solution, and the general operations regarding the whole lifecycle
of the product, from installation to operation and decommissioning.
The drawings and photos in this manual are representative examples. However, discrepancies may be observed between the
visual supports and the actual product.
AX20/AX30 Palletizing Solution
10