Powerpick20/30 Vacuum Gripper (Optional) - ROBOTIQ AX20 Manual

12.1.2. PowerPick20/30 Vacuum Gripper (Optional)

We, the manufacturer:
hereby declares, under sole responsibility, that the product:
complies with the following essential requirements of the European Directive 2006/42/EC on machinery:
1.1.2, 1.1.3, 1.1.5, 1.3.2, 1.3.4, 1.5.1, 1.5.2, 1.5.3, 1.5.4, 1.5.8, 1.5.10, 1.5.11, 1.7.2.
The product is considered as partly completed machinery and has been evaluated in accordance with the following harmonised
standards:
The product must not be put into service until the final machinery into which it is to be incorporated has been declared in
conformity with the provisions of the Directive 2006/42/EC, including amendments.
The manufacturer declares that the product complies with the following European Directives and harmonised standards:
●
●
●
The manufacturer also declares the use of these other technical standards, as far as applicable:
Name and address of the person authorised to compile the relevant technical documentation:
The relevant technical documentation is compiled in accordance with part B of Annex VII of Directive 2006/42/EC and will be
presented electronically by the manufacturer to competent national authorities, if required with a substantiated reason.
Signed in Lévis on 2024-07-12.
Louis-Alexis Allen Demers, ing., Eng., Ph. D.
Technical Director
AX20/AX30 Palletizing Solution
EC Declaration of Incorporation (Original)
In accordance with the EC Machinery Directive 2006/42/EC, Annex II, 1., Section B.
Lévis, Québec, Canada, G7A 2N1
PowerPick Vacuum Gripper (PowerPick10 & PowerPick20/30)
● EN ISO 12100:2010
● ISO 4414:2010
2014/30/EU (EMC Directive)
○ EN 61000-6-2:2016
○ EN 61000-6-4:2007 + A1:2011
2011/65/EU + 2015/863 (RoHS Directive)
○ EN 50581:2012
2012/19/EU (WEEE Directive)
○ EN 50419:2005.
ISO 9409-1:2004.
Robotiq Inc.
966 Chemin Olivier, Suite 500
All serial number
(and accessories)
Leif Möller,
9 Blvd. des Droits de l'Homme,
69120 Vaulx-en-Velin, France