ROBOTIQ AX20 Manual page 54

Tip Over Hazard
The forks of the pallet truck or forklift truck must be at least 1220 mm (48 in) in length.
l
The weight capacity of the pallet truck or forklift truck must be at least 1000 kg (2,200 lb).
l
The Solution must be transported on a level, even and solid concrete surface using a pallet truck or forklift
l
truck.
The robot should be positioned as per the instructions.
l
The cabling and tubing must be disconnected before transportation.
l
The Solution should be lifted as little as possible, and attention must be paid to the center of gravity to reduce
l
the risk of tip over.
It is the responsibility of the user to determine a safe and stable course of action for the moving of the Solution
l
using rigging and hoisting equipment.
Employees should be qualified and properly trained on how to use the lifting / hoisting / rigging equipment as
l
well as the Solution.
The Solution should be secured and stable prior to its moving and lifting.
l
Failure to account for these factors may result in material damage, bodily injury or death.
Tip Over Hazard
Failure to follow directions of the Moving and Positioning the Solution section and / or Solution Mobility (Wash
Down and Production Line Shifts) sections of the current manual may result in material damage, bodily injury or
death.
WARNING
WARNING
AX20/AX30 Palletizing Solution
54