Safety; Disclaimer - ROBOTIQ POWERPICK10 Instruction Manual

Vacuum gripper
Table of Contents

Advertisement

2. Safety

2.1. Disclaimer

The intent of this section is to provide general guidelines for safe use of the PowerPick10 Vacuum Gripper.
Always follow local rules and regulations.
The installer is responsible for the safe installation and commissioning of the PowerPick10 Vacuum Gripper.
Robotiq accepts no liability for damage, injury or any legal responsibility incurred directly or indirectly from the use of this product.
The user (installer and operator) shall observe safe and lawful practices including but not limited to those set forth in this document.
The term operator refers to anyone responsible for any of the following operations on the Robotiq Vacuum Gripper:
Installation
l
Control
l
Maintenance
l
Inspection
l
Calibration
l
Programming
l
Decommissioning
l
This manual covers the various components of the PowerPick10 Vacuum Gripper and the general operations regarding the whole
life-cycle of the product, from installation to operation and decommissioning.
The drawings and photos in this manual are representative examples. However, discrepancies may be observed between the
visual supports and the actual product.
Any user of the Robotiq PowerPick10 must have read and understood all of the instructions in the
following section before operating it.
It is the installer/operator's responsibility to ensure that all local safety measures and regulations are
met.
Any use of the PowerPick10 Vacuum Gripper in non-compliance with these instructions is deemed
inappropriate and may cause injury or damage.
CAUTION
WARNING
PowerPick10 - Instruction Manual
9

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the POWERPICK10 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents