Maintenance And Repair - ROBOTIQ AX20 Manual

Impact / Crush Hazard
Failure to properly set all the robot safety parameters according to the Robot Operation Zone sectionof the
current manual may result in material damage, bodily injury or death.
Improper Moving of the Solution
Tip Over Hazard
Failure to follow directions of the Moving and Positioning the Solution section and/or the Solution Mobility
(Wash Down and Production Line Shifts) section sections of the current manual may result in material damage,
bodily injury or death.

Maintenance and Repair

Failure to perform specified inspections, maintenance procedures and schedule specified in the current manual
may result in material damage, bodily injury or death.
During maintenance, inspection, cleaning and repair work, make sure that the Palletizing Solution electrical
power and air supply are turned off and locked out.
Maintenance and repair work should only be carried by qualified and authorized service personnel.
l
After maintenance and repair work, make sure to remove all tools and equipment to prevent ejected or falling parts, material
l
damage or bodily injury.
All pneumatic tools and devices must be emptied of compressed air before maintenance and repair work.
l
All electric tools and devices must be safely isolated before maintenance and repair work.
l
Always inform the operator before performing maintenance or repair work. Notify a supervisor and lock out/tag out the machine
l
to prevent users from turning on and using the system. Enforce local safety regulations.
If necessary, secure the maintenance and repair area with temporary barriers.
l
Before performing repair work, clean the affected parts, especially the connections and fittings.
l
Install the Solution in a safe position. Depending on the maintenance and repair work to carry out, parts may come loose and
l
cause injury.
Never go under or near the axis carriage or robot arm when performing maintenance, service, inspection, cleaning or repair
l
work.
WARNING
WARNING
WARNING
WARNING
AX20/AX30 Palletizing Solution
14