Setting The Access Mode; Naming Your Enforcement Cluster; Changing The Ms Host Name; Changing The Es Host Name - Extreme Networks AG200 User Manual

System Administration

Setting the Access Mode

The access mode selection is a quick way to shut down all traffic into an Enforcement cluster, or open it
up for trial-use purposes.
To change the access mode:
Sentriant AG Home window>>System monitor>>Select an Enforcement cluster
1 Select one of the following from the Access mode area:
normal—Access is regulated by the NAC policies
■
allow all—All requests for access are granted, but endpoints are still tested
■
quarantine all—No access is granted, but endpoints are still tested
■
2 Click ok.

Naming your Enforcement Cluster

To name your Enforcement cluster:
Sentriant AG Home window>>System configuration>>Enforcement clusters & servers>>Select an
Enforcement cluster
1 In the Cluster name text field, enter a name. Choose a name that describes the cluster, such as a
geographic location (like a street or city name), a building, or your company name.
2 Click ok.

Changing the MS Host Name

To change the MS host name:
See "Modifying MS Network Settings" on page

Changing the ES Host Name

To change the ES host name:
See "Changing the ES Network Settings" on page
296
58.
54.
Sentriant AG Users' Guide, Version 5.0