Chapter 14: System Administration; Launching Sentriant Ag; Launching And Logging Into Sentriant Ag; Logging Out Of Sentriant Ag - Extreme Networks AG200 User Manual

14 System Administration

Launching Sentriant AG

Launching and Logging into Sentriant AG

To launch and log into Sentriant AG:
Browser window on the workstation
1 Using , point your browser to the Sentriant AG MS IP address or host name. The login
https://
page appears.
2 Enter the User name and Password that you defined the first time you logged in.
3 Click log in. The Sentriant AG Home window appears.

Logging out of Sentriant AG

To log out of Sentriant AG:
Any Sentriant AG window
Click Logout in the upper right corner of the Sentriant AG home window. When the logout procedure
completes, the Extreme Networks, Inc. login window appears.

Important Browser Settings

There are several browser configuration settings to make, depending on which browser you are using.
Please see "Important browser settings" in the Installation Guide for details.

Managing your Sentriant AG License

Sentriant AG is licensed on a concurrent-IP basis. If the number of licensed IP addresses is at the
maximum, an endpoint trying to connect is not scanned, and is denied/granted access based on the
policy for untestable endpoints. A notification that the endpoint limit has been exceeded appears in the
interface, and the administrator receives an email (if notifications are enabled).
Sentriant AG Users' Guide, Version 5.0
293