Sentriant Ag Requests Supported; Examples Of Requests - Extreme Networks AG200 User Manual

Sentriant AG Requests Supported

The following Sentriant AG requests are supported:
GetDeviceInfo—Requests the endpoint identification
●
StartTests—Requests that the endpoint be tested
●
PutDeviceInfo—Sets endpoint properties
●
TemporarilyDenyAccess—Specifies to temporarily deny access to the specified endpoint or
●
endpoints.
TemporarilyAllowAccess—Specifies to temporarily allow access to the specified endpoint or
●
endpoints.
ClearTemporaryAccess—Specifies to clear temporary states for the specified endpoint or endpoints.
●

Examples of Requests

The following shows examples of information for requests supported:
-------------------------------------------------------------------------
<NACRequest>
<operation>GetDeviceInfo</operation>
<devices>
<device>
<ip>172.17.5.2</ip>
</device>
<device>
<whereClause>mac_address='00:0C:29:12:4B:4A'</whereClause>
</device>
</devices>
</NACRequest>
<NACRequest>
<operation>StartTestsRequest</operation>
<devices>
<device>
<ip>172.17.5.2</ip>
</device>
<device>
<mac>00:0c:29:12:4b:4a</mac>
</device>
</devices>
</NACRequest>
<NACRequest>
<operation>PutDeviceInfo</operation>
<devices>
<device>
<ip>172.17.5.2</ip>
<deviceProps>
<entry>
<string>key1</string>
<string>value1</string>
</entry>
<entry>
<string>key2</string>
</entry>
</deviceProps>
</device>
Sentriant AG Users' Guide, Version 5.0
API
281