Extreme Networks AG200 User Manual page 316

System Administration
Figure 157: checkOpenPorts.py script (continued)
#
# Make up a summary for the test. This will show up in the description
# field in the policy editor.
#
testSummary = "This test takes a list of ports that should NOT be found
open on the remote host. If any port is found open, this test will fail. This
script will only succeed if none of the undesired ports are found open."
#
# These are the arguments to run the test. This is displayed in the
command
# line help.
#
testArguments = \
"""
--host=<hostname, IP, or NETBIOS>
--input ports_not_allowed=<comma delimited list of ports>
Example: <this script> --host=somehost --input
"ports_not_allowed=23,80"
"""
#
# All tests must define the runTest method with the self and the debug
# parameters.
#
def runTest(self,debug=0):
#
# All tests must call the initialize routine
#
self.initTest()
if debug:
session="+self.session.id()+")"
#
# Create a hash to store the return results.
# All tests must fill return a hash with the following keys:
#
#
successful
#
#
#
returnHash = {}
returnHash["status_code"] = 1
returnHash["result_code"] = "pass"
returnHash["result_message"] = "The ports were not open."
316
print "Starting checkOpenPorts(host="+self.session.host()+",
status_code - 0 if an unexpected error occurred, 1 if
result_code - pass, fail or some error
result_message - the message to display to the end-user
Sentriant AG Users' Guide, Version 5.0