Ports Used For Testing; Firewall Settings; Figure 67: Local Area Connection Properties Window - Extreme Networks AG200 User Manual

3 Select Properties. The Local area connection properties window appears:

Figure 67: Local Area Connection Properties Window

4 On the General tab, in the This connection uses the following area, verify that File and Printer
sharing is listed and that the check box is selected.
5 Click OK.
For more information on file and printer sharing, refer to the following:
To configure File and Printer Sharing for Microsoft
●
documentation/windows/xp/all/proddocs/en-us/howto_config_fileandprintsharing.mspx
To add a network component—http://www.microsoft.com/resources/documentation/windows/xp/all/
●
proddocs/en-us/howto_config_fileandprintsharing.mspx

Ports Used for Testing

You might need to configure some firewalls and routers to allow Sentriant AG to access the following
ports for testing: —
Agentless test method—137, 138, 139, and 445
●
ActiveX and agent-based test method—1500
●

Firewall Settings

Sentriant AG can perform tests through firewalls on both managed and unmanaged endpoints.
Sentriant AG Users' Guide, Version 5.0
Networks—http://www.microsoft.com/resources/
End-user Access
149