Extreme Networks AG200 User Manual page 80

System Configuration
4 Enter the password of the account entered into the Administrator user name field in the
Administrator password text field.
5 Enter the list of domain controllers, separated by commas, for this domain in the Domain
controllers text field.
6 To test the Windows domain settings:
a Select one of the following from the Server to test from drop-down list in the Test Windows
domain settings area:
The ES in this cluster to test from, or
●
The MS
●
NOTE
If you have a single-server installation, the Server to test from drop-down list is not available.
b To verify a specific set of user credentials in addition to the Windows domain settings, select the
Verify credentials for an end-user check box, and specify the following:
1) Enter the user name of the end-user in the User name text box.
2) Enter the password of the end-user in the Password text box.
3) Re-enter the password of the end-user in the Re-enter password text box.
c Click test settings.
7 Click ok.
80
Sentriant AG Users' Guide, Version 5.0