Extreme Networks AG200 User Manual page 251

802.1X Quarantine Method
DefaultPosture=0
;
; Use the following timeouts (in milliseconds) for contacting the Sentriant AG
server.
; These timeouts should be coordinated with the RADIUS server and switch timeouts for
authentication.
;
;ResolveTimeout=0
;ConnectTimeout=60000
;SendTimeout=30000
;ReceiveTimeout=30000
; Use these settings for non-Extreme switches
;
; Uncomment if you want to assign a VLAN for endpoints with a healthy or checkup
posture
; HealthyRadiusAttributes=Tunnel-Medium-Type,Healthy-Tunnel-Pvt-GroupId,Tunnel-Type
; CheckupRadiusAttributes=Tunnel-Medium-Type,Healthy-Tunnel-Pvt-GroupId,Tunnel-Type
QuarantineRadiusAttributes=Tunnel-Medium-Type,Quarantine-Tunnel-Pvt-GroupId,Tunnel-
Type
InfectedRadiusAttributes=Tunnel-Medium-Type,Quarantine-Tunnel-Pvt-GroupId,Tunnel-Type
UnknownRadiusAttributes=Tunnel-Medium-Type,Unknown-Tunnel-Pvt-GroupId,Tunnel-
Type,Unknown-Session-Timeout,Unknown-Termination-Action
;
; Use these settings for Extreme switches
;
; Uncomment if you want Sentriant AG to assign a VLAN for endpoints with a healthy or
checkup posture
; HealthyRadiusAttributes=Healthy
; CheckupRadiusAttributes=Healthy
; QuarantineRadiusAttributes=Quarantine
; InfectedRadiusAttributes=Quarantine
; UnknownRadiusAttributes=Unknown
;
; Policy attributes - In case you want to add attributes to a given policy regardless
of posture.
; Mainly used because IAS does not contain all standard radius attributes.
; Domain Computers-RadiusAttributes=Unknown-Session-Timeout,Unknown-Termination-
Action
;
; If you have more than one 802.1X enabled switch, copy the previous section and
change <NAS IP>
; to that switches IP address. If the other switches have the same settings, use the
Reference setting.
; For example:
;
251
Sentriant AG Users' Guide, Version 5.0