Figure 136:Ias, Remote Access Policy, Add Attribute - Extreme Networks AG200 User Manual

1) Click Add.
Figure 136: IAS, Remote Access Policy, Add Attribute
2) Select Tunnel-Medium-Type. (Adding the first of the three attributes.)
3) Click Add.
4) Click Add again on the next window.
5) From the Attribute value drop-down list, select 802 (includes all 802 media.
6) Click OK.
7) Click OK.
8) Select Tunnel-Pvt-Group-ID.
9) Click Add.
10) Click Add again on the next window. (Adding the second of the three attributes.)
11) In the Enter the attribute value area, select the String radio button and type the VLAN ID
(usually a number such as
12) Click OK.
13) Click OK.
14) Select Tunnel-Type. (Adding the third of the three attributes.)
15) Click Add.
16) Click Add again on the next window.
17) From the Attribute value drop-down list, select Virtual LANS (VLAN).
18) Click OK.
19) Click OK.
20) Click OK.
10 Repeat step 9 for every VLAN group defined in Active Directory.
IMPORTANT: The order of the connection attributes should be most-specific at the top, and most-
general at the bottom.
Sentriant AG Users' Guide, Version 5.0
) in the text box.
50
802.1X Quarantine Method
245