Ntlm 2 Authentication; Working With Ranges - Extreme Networks AG200 User Manual

System Administration
2 Save the file and copy it to the Sentriant AG server (either MS or ES).
3 Log into the Sentriant AG server as root.
4 Enter the following command:
setProperty.py -f
5 From a workstation, open a browser window and point to the Sentriant AG MS.
6 Enter a new User Name and Password when prompted.

NTLM 2 Authentication

If your network is configured for Windows NT LAN Manager version 2 (NTLMv2) challenge/response
authentication only, make the following change to the
To enable Sentriant AG for NTLM v2:
Command line window
1 Log in as
root
2 Open the following file with a text editor such as
/etc/samba-tng/smb.conf
3 Add the following line:
client ntlmv2 = auto
4 Save and exit the file.

Working with Ranges

In Sentriant AG implementations, particularly in trial installations where you are connecting and
disconnecting cables to a number of different types of endpoints, you can filter the activity by
specifying the following:
Ranges to monitor—This property filters results in the display window, it does not keep
●
Sentriant AG from testing other systems.
Ranges to ignore—Does not test the ranges listed.
●
Ranges to enforce—This property is only valid for DHCP mode. It modifies the iptables QUEUE
●
rule such that only the networks set to be enforced will ever get quarantine addresses.
328
<filename>
to the Sentriant AG server (using SSH or login directly).
file:
smb.conf
:
vi
Sentriant AG Users' Guide, Version 5.0