Extreme Networks AG200 User Manual page 105

9 Enter the Reconnect idle time. This is the amount of time in milliseconds that a telnet/SSH console
can remain idle or unused before it is reset.
10 Select the Show scripts plus symbol to show the following scripts:
NOTE
You must enter the script contents yourself for the 802.1X device you are adding.
Initialization script—The expect script used to log into the console and enter enable mode.
■
Re-authentication script—The expect script used to perform endpoint re-authentication.
■
Exit script—The expect script used to exit the console.
■
11 Click ok.
NOTE
Click revert to defaults to restore the default settings.
Sentriant AG Users' Guide, Version 5.0
System Configuration
105