Extreme Networks AG200 User Manual page 96

System Configuration
7 SSH settings:
a Enter the User name used to log into this device's console.
b Enter the Password used to log into this device's console.
c To help confirm accuracy, type the same password you entered into the Password field in the Re-
enter Password field.
d Enter the Enable mode user name that is used to enter enable mode on this device.
e Enter the Password used to enter enable mode on this device.
f To help confirm accuracy, type the same password you entered into the Enable password field in
the Re-enter Password field.
g Enter the amount of time, in milliseconds, before an idle open SSH session is reset. The default is
60000 (60 seconds) in the Reconnect idle time field.
8 Telnet settings:
a Enter the User name used to log into this device's console.
b Enter the Password used to log into this device's console.
c To help confirm accuracy, type the same password you entered into the Password field in the Re-
enter Password field.
d Enter the Enable mode user name that is used to enter enable mode on this device.
e Enter the Password used to enter enable mode on this device.
f To help confirm accuracy, type the same password you entered into the Enable password field in
the Re-enter Password field.
g Enter the amount of time, in milliseconds, before an idle open telnet session is reset. The default
is 60000 (60 seconds) in the Reconnect idle time field.
96
Sentriant AG Users' Guide, Version 5.0