Extreme Networks Sentriant AG200 Hardware Quick Start Manual

Hide thumbs Also See for Sentriant AG200:

Sentriant AG200 Hardware Quick-Start Guide

Getting Documentation

Detailed information about installing and using the Extreme Networks

available in the following documents:

Sentriant AG200 Hardware Installation Guide, Version 5.1

●

Sentriant AG Software Installation Guide, Version 5.1

●

Sentriant AG Software User Guide, Version 5.1

●

These documents are available in the /usr/local/nac/webapps/ROOT/docs/ directory on the

appliance or on the installation media shipped with the appliance.

In addition, documentation for Extreme Networks products is available from the Extreme Networks

website at the following location:

http://www.extremenetworks.com/services/documentation

Install the Sentriant AG appliance in a standard 19-inch (48.26 cm) rack as follows:

1 Attach the mounting brackets to each side of the Sentriant AG appliance, using the provided screws

Part Number: 120426-00 Rev. 01

Sentriant

SN_003

AG appliance is

Table of Contents

Do you have a question about the Sentriant AG200 and is the answer not in the manual?

Page 1 ● These documents are available in the /usr/local/nac/webapps/ROOT/docs/ directory on the appliance or on the installation media shipped with the appliance. In addition, documentation for Extreme Networks products is available from the Extreme Networks website at the following location: http://www.extremenetworks.com/services/documentation Installing the Appliance Install the Sentriant AG appliance in a standard 19-inch (48.26 cm) rack as follows:...
Page 2 Setting Up the Appliance To perform the initial setup for your Sentriant AG appliance, refer to Chapter 4, “Startup and Configuration,” in the Sentriant AG200 Hardware Installation Guide. For information about configuring the Sentriant AG appliance, refer to Chapter 4, “Installing Sentriant AG,”...