Figure 132:Error Message - Extreme Networks AG200 User Manual

802.1X Quarantine Method
These steps assume there is a Domain Certificate Authority (CA) available to request a certificate. If
there is not a CA available, the certificate needs to be imported manually.
To request a certificate from a Domain Certificate Authority:
Figure 132: Error Message
a Open the Microsoft management console by choosing Start>>Run and entering
b Choose File>>Add/Remove Snap-in.
c Click Add.
d Choose the certificates snap-in and click Add.
e Select Computer account and click Next.
f Select Local Computer and click Finish.
g Click Close and OK to exit out of the properties.
h Open the Certificates folder under the Console Root.
i Right-click on the Personal folder and select All Tasks>>Request New Certificate.
j Follow the instructions to generate a certificate request. If there are no certificate templates
available you need to edit the certificate template permissions (in mmc add the certificate
template snap-in, right-click on the template, select properties, and change the permissions for
your user) on the certificate authority. The Computer or RAS and IAS templates both work.
k Once the Certificate is granted by the certificate authority, return to the IAS policy editor to
continue the setup.
l Click Configure to configure the certificate for use with the PEAP authentication method. The
Protected EAP Properties window appears
242
(Figure 133).
Sentriant AG Users' Guide, Version 5.0
.
mmc