Resetting The Sentriant Ag Server Password - Extreme Networks AG200 User Manual

System Administration
Table 13: Sentriant AG passwords
Sentriant AG
password
Sentriant AG
console,
administrator
account
endpoint /
domain
administrator
Windows
domain
OpenLDAP
Novell
eDirectory
* See the Sentriant AG Installation Guide for the installation process.

Resetting the Sentriant AG Server Password

If you cannot remember the root login password for the Sentriant AG MS or ES,this process allows you to
enter a new one.To reset the Sentriant AG server root password:
1 At the Sentriant AG MS or ES server (not through the web or SSH), reboot the MS or ES server by
pressing:
[CTRL]+[ALT]+[DELETE]
326
Set during
Initial install process *
Manually entered on the endpoint by
the end-user.
If the end-user has not defined a
login/password combination, the
default login is usually
"administrator" with a blank
password.
Known passwords are entered on the
System
configuration>>Windows>>Agentless
credentials window to allow
Sentriant AG to test the endpoint.
Manually entered after installation on
the System
configuration>>Quarantining>>802.1
x Quarantine method radio button
window.
Manually entered after installation on
the System
configuration>>Quarantining>>802.1
x Quarantine method radio button
window.
Manually entered after installation on
the System
configuration>>Quarantining>>802.1
x Quarantine method radio button
window.
Recovery process
• For known passwords
—
Sentriant AG Home window >>
System configuration >> User
accounts
• For unknown passwords
"Changing the Sentriant AG
Administrator Password" on
page 327.
Password recovery on endpoints is
beyond the scope of this document.
Windows domain password recovery
is beyond the scope of this
document.
OpenLDAP password recovery is
beyond the scope of this document.
Novell eDirectory password recovery
is beyond the scope of this
document.
Sentriant AG Users' Guide, Version 5.0
See
—