6
NAC Policies
NAC policies are collections of tests that evaluate remote endpoints attempting to connect to your
network. You can use the standard tests installed with Sentriant AG, or you can create your own custom
tests.
NOTE
The default NAC policy is indicated by the check mark on the icon to the left of the NAC policy name. See
"Selecting the Default NAC Policy" on page 188 for instructions on selecting and charging the default NAC policy.
The NAC policies window (shown in
NAC policies, delete NAC policies, access specific NAC policies. Once you access a specific policy, you
can perform the following tasks:
Basic settings—Edit NAC policies, assign NAC policies to a group, enable or disable the NAC
●
policy, select which OSs are not tested, but allowed access, set retest frequency, and set quarantine
times.
Domains and endpoints—Assign endpoints and domains to a policy.
●
Tests—Select tests, select test properties, select test failure actions.
●
To view the NAC policies window:
Sentriant AG Home window>>NAC policies
Figure 98: NAC Policies Window
Sentriant AG Users' Guide, Version 5.0
Figure
98) is where you create NAC policies and groups, disable
185