Using Ports In Accessible Services And Endpoints; Figure 107:Accessible Services Window - Extreme Networks AG200 User Manual

Using Ports in Accessible Services and Endpoints

To use a port number when specifying accessible services and endpoints (cluster default):
Sentriant AG Home window>>System configuration>>Accessible services
The following figure shows the Accessible services window:
Figure 107: Accessible Services Window
In order to grant access for quarantined endpoints to needed services, add entries to the Accessible
services list. For inline enforcement mode, enter the IP addresses of the servers that provide the
services. A port or ports can be added to limit the access to the servers from quarantined endpoints.
For all other deployment modes, the Fully Qualified Domain Name (FQDN) of the target servers should
be added to the list (for example mycompany.com). If the specified servers are not behind an ES, a
network firewall must be used to control access to only the desired ports.
1 For inline enforcement mode, in the Accessible services and endpoints area, enter an endpoint
followed by a colon (:), followed by a port number as shown as follows:
10.0.16.100:53
Separate multiple endpoint entries with a carriage return (new line):
10.0.16.100:53
10.0.16.100:80
10.0.16.100:81
10.0.16.100:82
2 Click ok.
Sentriant AG Users' Guide, Version 5.0
Quarantined Networks
203