Agentless Credentials - Extreme Networks AG200 User Manual

System Configuration
NOTE
You can verify your changes to the end-user access screens immediately by pointing a browser window to port 88 of
your Sentriant AG installation. For example, if the IP address of your Sentriant AG installation is 10.0.16.18, point
the browser window to:
http://10.0.16.18:88
3 Click ok.

Agentless Credentials

When Sentriant AG accesses and tests endpoints, it needs to know the administrator credentials for that
endpoint. If your network uses a Windows domain controller and the connecting endpoint is a member
of a configured domain, Sentriant AG uses the information supplied to access and test the endpoint.
NOTE
Setting windows credentials here sets them as default settings for all clusters. You can override these settings on a
per-cluster basis by selecting a cluster first, and then making changes in Agentless credentials.
124
Sentriant AG Users' Guide, Version 5.0