Selecting Action Taken; About Sentriant Ag Tests - Extreme Networks AG200 User Manual

Selecting Action Taken

Actions can be passive (send an email), active (quarantine) or a combination of both.
To select the action to take:
Sentriant AG Home window>>NAC policies>>Select a NAC Policy>>Tests menu option
1 Click on the name of test to display the test's options.
NOTE
Click a test name to display the options; select the test check box to enable the test for the policy you are
modifying.
2 Select an action to take when an endpoint fails this test.
a Send an email notification...—sends an email to the email address specified (see "Notifications"
on page 119).
NOTE
An email is sent for each retest.
b Quarantine access—specify when the endpoint should be denied access.
1) immediately
2) grant temporary access...
If you select a temporary access period here, the end-users are allowed temporary access for
the specified time, after which they are denied access until they pass the test. The temporary
access period allowed is shown on the end-user results window (see "End-user Access" on
page 147).
NOTE
The minimum amount of time you can grant temporary access is 10 minutes.
3 Click ok.

About Sentriant AG Tests

Sentriant AG tests are assigned to NAC policies. NAC policies are used to test endpoints attempting to
connect to your network. Sentriant AG tests might be updated as often as hourly; however, at the time
of this release, the tests shown in "Tests Help" on page 337 were included (see "Viewing Information
About Tests" on page 198 for instructions on viewing the latest list of tests).
Sentriant AG Users' Guide, Version 5.0
NAC Policies
197