Extreme Networks AG200 User Manual page 181

Table 8: Default Test Names and Descriptions (continued)
Test name
checkMicrosoftOfficeMacroSecurityLevel.String.6
checkNetBiosInfo.String.1
checkPersonalFirewalls.String.1
checkPersonalFirewalls.String.2
checkPersonalFirewalls.String.3
checkServicePacks.String.1
checkServicePacks.String.2
checkServicePacks.String.3
checkServicePacks.String.4
checkServicePacks.String.5
checkServicePacks.String.6
checkServicesNotAllowed.String.1
checkServicesNotAllowed.String.2
checkServicesNotAllowed.String.3
checkServicesRequired.String.1
Sentriant AG Users' Guide, Version 5.0
Description
The Microsoft %s macro security level setting must
be set to %s or above. To change the security level,
open %s and do the following: Select \'Options...\'
under the \'Tools\' menu. Choose the \'Security\'
tab. Press the \'Macro Security...\' button. Select
the \'Security Level\' tab. Finally, select the security
level %s or higher.,
An unsupported operating system was
encountered.,
The required personal firewall software was not
found. Install a personal firewall and keep it up-to-
date. Supported firewall software: %s,
%s is installed but not running.,
%s service is installed and running.,
An unsupported operating system was
encountered.,
The OS is not relevant to this test.,
There are no service packs installed. Run Windows
Update to install the most recent service packs.,
There are no service packs installed. Run Windows
Update to install the most recent service packs.,
All required service packs are installed,
The service packs installed are not current. Run
Windows Update to install the most recent service
packs. The current installed service pack is %s.
You must be running service pack %s or later.,
All services found are allowed.,
The following services are not allowed: %s. Stop
the service by selecting Control
Panel>>Administrative Tools (located in the
Performance and Maintenance category
folder)>>Services application>>right-click on the
service and select properties. Change the startup
type to manual and click stop. Click OK to save
your changes.,
%s, # placeholder for link location for each service.
All required services were found.,
End-user Access
181