Extreme Networks AG200 User Manual page 152

End-user Access
The following method is an alternate method:
To configure the Windows XP Professional firewall to allow the RPC service to connect:
Windows>>Start>>Settings>>Control Panel>>Windows Firewall>>Exceptions tab
1 Select File and Print Sharing. (Verify that the check box is also selected.)
2 Click Edit.
3 Verify that the check boxes for all four ports are selected.
4 Select TCP 139.
5 Click Change Scope.
6 Select Custom List.
7 Enter the Sentriant AG Server IP address and the
8 Click OK.
9 Select UDP 137.
10 Click Change Scope.
11 Select Custom List.
12 Enter the Sentriant AG Server IP address and the
13 Click OK.
14 Select TCP 445.
15 Click Change Scope.
16 Verify that the My network (subnet) only radio button is selected.
17 Click OK.
18 Select UDP 138.
19 Click Change Scope.
20 Verify that the My network (subnet) only radio button is selected.
21 Click OK.
22 Click OK.
23 Click OK.
152
mask.
255.255.255.0
mask.
255.255.255.0
Sentriant AG Users' Guide, Version 5.0