Setting Up The Authenticator - Extreme Networks AG200 User Manual

How to enable a Windows 2000 Professional endpoint for 802.1X:
Windows Main Window-> Start-> Settings->Control Panel>>Administrative Tools>>Services
1 Wireless Configuration (this service needs to be started, if not already running the user needs to
right-click on the service named Wireless Configuration and click 'start').
2 Right-click on Local Area Connection. The Local Area Connection windows appears, as shown in
Figure 147 on page 263.
3 Select Properties (Figure 147 on page
4 General tab –
a Select the Show icon in notification area when connected check box. This enables the Windows
XP balloon help utility, which can assist you when entering information and troubleshooting
errors.
5 Authentication tab—
a Select the Enable IEE 802.1X authentication for this network check box.
b Select an EAP type from the drop-down list. For this example, select MD5-Challenge.
IMPORTANT: This EAP type must match the EAP type selected in
Server", step 7, step q on page
c Clear or select the Authenticate as computer when computer information is available check box.
The choice is yours.
6 Click OK.
7 Select to reboot if necessary.

Setting up the Authenticator

This section provides sample configurations for the following switches:
"Cisco® 2950 IOS" on page 266
●
"Cisco® 4006 CatOS" on page 267
●
"Enterasys® Matrix 1H582-25" on page 267
●
"Extreme® Summit 48si" on page 267
●
"ExtremeWare" on page 268
●
"ExtremeXOS" on page 269
●
"Foundry® FastIron® Edge 2402" on page 269
●
"HP ProCurve® 420AP" on page 270
●
"HP ProCurve® 530AP" on page 271
●
"HP ProCurve® 3400/3500/5400" on page 272
●
"Nortel® 5510" on page 272
●
Sentriant AG Users' Guide, Version 5.0
263).
241.
802.1X Quarantine Method
"Setting up the RADIUS
265