Nac Policy Hierarchy; Setting Retest Time; Setting Connection Time - Extreme Networks AG200 User Manual

NAC Policy Hierarchy

If an endpoint is listed in more than one NAC policy, the order of use is as alphabetical by name of
NAC policy (not including the default NAC policy).

Setting Retest Time

Retest endpoints connected to your network frequently to guard against potential changes in the remote
endpoint configurations.
To set the time to wait before retesting a connected endpoint:
Sentriant AG Home window>>NAC policies>>Select a NAC Policy>>Basic settings menu option
1 In the Retest frequency area, enter how frequently in minutes, hours, or days Sentriant AG should
retest a connected endpoint.
NOTE
A lower number ensures higher security, but puts more load on the Sentriant AG server.
2 Click ok.

Setting Connection Time

Disconnect end-users after a specific amount of time to guard against other parties accessing the
connection while the authenticated end-user has stepped away from their desk.
To set the time an end-user can be inactive before requiring the end-user to log in again:
Sentriant AG Home window>>NAC policies>>Select a NAC Policy>>Basic settings menu option
1 In the Inactive endpoints area, enter how long an end-user can be inactive before they have to log in
again.
NOTE
A lower number ensures higher security.
2 Click ok.
Sentriant AG Users' Guide, Version 5.0
NAC Policies
195