Setting Sentriant Ag Properties; Figure 148:Sentriant Ag Api Communication - Extreme Networks AG200 User Manual

API
The JMS bus is used to send requests (such as test endpoints, change access status, and set configuration
properties that cannot be set via the Sentriant AG console), and to publish events (such as test results
and endpoint status change) to external third parties.
Figure 148: Sentriant AG API Communication
Sentriant AG is continually testing endpoints that attempt to connect to your network and publishes
information about those endpoints as Events to Topics. An endpoint attempts to connect that is
untestable. Sentriant AG quarantines the endpoint and publishes a to that topic.
DeviceChangeEvent

Setting Sentriant AG Properties

Most Sentriant AG properties are set by default. To change or set properties, you must change the
properties as described in"Changing Properties" on page 298.
276
Sentriant AG Users' Guide, Version 5.0