Figure 133:Protected Eap Properties; Figure 134:Iap, Remote Access Policy, Properties - Extreme Networks AG200 User Manual

m Select the certificate you created in the previous steps, select the EAP types you want to use, and
click OK.
n Once the Certificate is granted by the certificate authority, edit the IAS policy.
o On the authentication tab click authentication methods.
p Select PEAP and click Edit.
q Select the new certificate and click Apply.
r Click Configure to configure the certificate for use with the PEAP authentication method. The
Protected EAP Properties window appears, as shown in the following figure:
Figure 133: Protected EAP Properties
9 Configure the new Remote Access Policy.
Figure 134: IAP, Remote Access Policy, Properties
Sentriant AG Users' Guide, Version 5.0
802.1X Quarantine Method
243