10 Enter the Enable mode user name.
11 Enter the password with which to enter enable mode.
12 Re-enter the enable mode password.
13 Enter the Reconnect idle time. This is the amount of time in milliseconds that a telnet/SSH console
can remain idle or unused before it is reset.
14 Select the Device is stacked check box if the device is in a stacked configuration.
15 Select the Show scripts plus symbol to show the following scripts:
Initialization script—The expect script used to log into the console and enter enable mode.
■
Re-authentication script—The expect script used to perform endpoint re-authentication.
■
Exit script—The expect script used to exit the console.
■
16 Click ok.
NOTE
Click revert to defaults to restore the default settings.
Sentriant AG Users' Guide, Version 5.0
System Configuration
103