Extreme Networks AG200 User Manual page 324
Version 5.0
Hide thumbs
Also See for AG200:
- Installation manual (80 pages) ,
- Hardware installation manual (40 pages) ,
- Hardware quick start manual (2 pages)
Table of Contents
Advertisement
System Administration
Editing the end-user test results message text:
Sentriant AG server command line
See "Customizing Error Messages" on page 177.
CAUTION
Make changes to the description only. For example, in the following text:
"checkServicePacks.String.3" : "There are no service packs installed. Run Windows Update to install the most recent
service packs."
Do not make changes to the text at the beginning of the line: "checkServicePacks.String.3" :
Viewing the end-user access windows:
Open an IE browser window
Point the IE browser to port 88 of your Sentriant AG ES. For example, if the IP address of your
Sentriant AG ES is 10.0.16.18, point an IE browser window to:
http://10.0.16.18:88
NOTE
If you would like to use a port other than 88, contact Extreme Networks, Inc. Technical Assistance Center (TAC) at
support@extremenetworks.com for assistance in making the necessary changes.
324
Sentriant AG Users' Guide, Version 5.0
Advertisement
Table of Contents
