Icom IC-7760 Basic Manual page 65

The assignable key functions for MIC Key:
Function
--- No function
Push to increase the frequency (in 50 Hz
steps*) or Memory channel.
UP * When the Tuning Step function is ON,
increases the frequency in the selected
Tuning Step.
Push to decrease the frequency (in 50 Hz
steps*) or Memory channel
DOWN * When the Tuning Step function is ON,
increases the frequency in the selected
Tuning Step.
UP Push to increase the frequency (in the
(VFO: kHz) selected Tuning Step) or Memory channel.
DOWN Push to decrease the frequency (in the
(VFO: kHz) selected Tuning Step) or Memory channel.
XFC Hold down for 1 second to monitor signals.
• Push to select the VFO mode and the
Memory mode.
VFO/MEMO
• Hold down for 1 second to copy the
Memory channel contents to the VFO.
• Push to increase an operating band.
BAND UP • Hold down for 1 second to recall the
Band Stacking Register contents.
• Push to decrease an operating band.
BAND DOWN • Hold down for 1 second to recall the
Band Stacking Register contents.
Push to announce the S-meter level,
frequency, and operating mode.
SPEECH
L The announced information depends on
the settings.
• Push to select the operating mode.
• Hold down to toggle USB and LSB, CW
MODE
and CW-R, RTTY and RTTY-R, or PSK
and PSK-R.
Description Function
In the SSB, AM, or FM mode
• Push to transmit the voice audio
Voice/Keyer/
recorded on the SD card once.
RTTY/PSK
• Hold down for 1 second to repeatedly
Memory 1
transmit the voice audio.
LIf the voice audio is not saved in the Voice TX
memory (T1 ~ T4), this function is disabled.
In the CW mode
Voice/Keyer/
• Push to transmit the Keyer memory
RTTY/PSK
content once.
Memory 2
• Hold down for 1 second to repeatedly
transmit the memory content.
LIf the Keyer memory content (M1 ~ M4) is not
entered, this function is disabled.
Voice/Keyer/
In the RTTY mode
RTTY/PSK
Push to transmit the RTTY memory
Memory 3
content once.
LIf the RTTY memory content (RT1 ~ RT4) is
not entered, this function is disabled.
In the PSK mode
Voice/Keyer/
Push to transmit the PSK memory content
RTTY/PSK
once.
Memory 4
LIf the PSK memory content (PT1 ~ PT4) is
not entered, this function is disabled.
• Push to turn the Tuning Step function
ON or OFF.
TS
• Hold down for 1 second to open the TS
screen.
• Push to sequentially call up the
contents in the Memo Pads.
MPAD
• Hold down for 1 second to save the
displayed contents into the Memo Pad.
• Push to turn the Split function ON or
OFF.
SPLIT
• Hold down for 1 second to turn ON the
Quick Split function.
• Push to toggle the frequency, mode,
and selected memory channel between
CHANGE the Main and Sub band.
• Hold down for 1 second to copy the
Main band settings to the Sub band.
• Push to turn the antenna tuner ON or
OFF.
TUNER • While the indicator on
red, hold down for 1 second to start
manual tuning.
8-8
8
SET MODE
Description
blinks
TUNER
8