Multi-Function Dial - Icom IC-7760 Basic Manual

1
PANEL DESCRIPTION

Multi-function dial

When the Multi-function menu is closed, the
control can be enabled to adjust functions.
The function is displayed in the upper right corner of
the screen.
z To assign the function to the
the item for 1 second on the Multi-function menus.
MULTI
Function indicator for
MULTI
control, touch
MULTI
Assignable key functions
* Touch the function indicator, or hold down
second to assign the function to the
Indicator
Changes the operating frequency in kHz
kHz*
steps. (VFO mode only)
Selects Memory channels. (Memory mode
M-CH*
only)
RF PWR Adjusts the transmit output power.
MIC G Adjusts the microphone gain.
COMP Adjusts the Speech Compressor level.
Adjusts the center frequency of the
D-SEL automatic preselector using the Digital
Selector function.
Adjusts the audio level for the Monitor
MONI
function.
SPEED Adjusts the Keying speed.
PITCH Adjusts the CW pitch.
S TONE Adjusts the CW side tone output level.
NB LEV Adjusts the Noise Blanker level.
Adjusts the DEPTH (Noise attenuation
NB DEP
level).
Adjusts the WIDTH (Blanking duration
NB WID
time).
NR LEV Adjusts the Noise Reduction level.
APF Adjusts the peak frequency of the APF.
APF LV Adjusts the audio level of the APF.
NOTCH Adjusts the Notch filter frequency.
VOX G Adjusts the VOX gain.
A-VOX Adjusts the ANTI VOX level
VOX D Adjusts the VOX delay time.
BKIN D Adjusts the Break-in delay time.
Adjusts the transmitter level at the driver
DRIV G
stage.
Adjusts the attenuator level of up to 45 dB
ATT
(in 3 dB steps).
1-9
MULTI
for 1
control.
MULTI
Action