Usb Flash Drive; Others - Icom IC-7760 Basic Manual

USB Flash Drive

» SET > USB Flash Drive
MENU
Load Setting
Selects the saved data file to load.
Save Setting
Saves the setting data onto a USB flash drive.
USB Flash Drive Info
Displays the USB flash drive capacity.
Screen Capture View
Displays the selected screen capture.
Firmware Update
Displays the Firmware Update mode.
Format
Formats the USB flash drive.
If you use a brand new USB flash drive, be sure to
format it in the transceiver.
Unmount
Unmounts the USB flash drive.
Before you remove a flash drive when the transceiver
is ON, be sure to electrically unmount it. Otherwise,
the data may be corrupted or deleted.

Others

» SET > Others > Information
MENU
Version
Displays the transceiver firmware's version number.
MAC Address (LAN)
MAC Address (Controller)
MAC Address (RF Deck)
Displays the MAC address used in this transceiver.
SERIAL NO. (Controller)
SERIAL NO. (RF Deck)
Displays the serial number of the controller or RF
deck.
» SET > Others
MENU
Touch Screen Calibration
Touch to adjust the touch screen.
L See the Advanced manual for details.
» SET > Others > Reset
MENU
Partial Reset
Resets operating settings to their default values (VFO
frequency, VFO settings, menu contents).
L See page 10-1 for details.
All Reset
Clears all data and returns all settings to their factory
defaults. Memory channel contents, filter setting, and
so on will all be cleared, so you will need to rewrite
your operating settings.
L See page 10-1 for details.
8-18
8
SET MODE
8