Clock; Setting The Date And Time; D Setting The Date; D Setting The Current Time - Icom IC-7760 Basic Manual

9

CLOCK

Setting the date and time

D Setting the date

1. Open the "Date" screen.
» SET > Time Set > Date/Time > Date
MENU
2. Touch [+] or [–] to set the date.
3. Touch [SET] to save the date.
• Returns to the previous screen.
L To cancel the editing, touch
4. To close the DATE/TIME screen, push
several times.

D Setting the current time

1. Open the "Time" screen.
» SET > Time Set > Date/Time > Time
MENU
2. Touch [+] or [–] to set the current time.
3. Touch [SET] to save the time.
• Returns to the previous screen.
L To cancel the editing, touch
4. To close the DATE/TIME screen, push
several times.
NOTE: The backup battery for the internal clock
The IC-7760 has a lithium backup battery (CR2032)
for the internal clock and timer functions.
When the backup battery is exhausted, the
transceiver normally works but cannot retain the
current time.
See the Advanced manual for the battery
replacement.
.
EXIT
.
EXIT
9-1

D Setting the UTC offset

1. Open the "UTC Offset" screen.
» SET > Time Set > UTC Offset
MENU
2. Touch [+] or [–] to set the UTC offset.
3. Touch to save the UTC offset.
• Returns to the previous screen.
4. To close the TIME SET screen, push
several times.
TIP: UTC time is displayed under the current
time display on the operating screen, only when
"CLOCK2 Function" is set to "ON" (default).

D Displaying CLOCK2

You can display a different time, such as UTC, or
other location. This is convenient when you make
QSOs with non-local-time stations.
Set the CLOCK2 function ON to display the time on
the operating screen. (Default: ON)
1. Open the "CLOCK2 Function" screen.
» SET > Time Set > CLOCK2 Function
MENU
2. Touch ON or OFF.
• ON: CLOCK2's time is displayed under the current
time.
• OFF: CLOCK2's time is not displayed.
• Returns to the previous screen.
EXIT