Managing The Printer Using Ftp Client - Canon LBP-3300 Network Manual

Managing the Printer Using FTP Client

You can manage the printer with FTP Client using the following procedure. Also,
you can upgrade the firmware.
1
3
2
3
3-42

Managing the Printer Using FTP Client

Run Command Prompt or MS-DOS Prompt.
For Windows XP/Server 2003: From the [Start] menu, select [All Programs] ©
[Accessories] © [Command Prompt].
For Windows 2000: From the [Start] menu, select [Programs] © [Accessories]
© [Command Prompt].
For Windows Me: From the [Start] menu, select [Programs] © [Accessories] ©
[MS-DOS Prompt].
For Windows 98: From the [Start] menu, select [Programs] © [MS-DOS Prompt].
Enter the following command, then press the [ENTER] key on
your keyboard.
ftp <the IP address of the printer>
NOTE
If you are not sure about the IP address of this printer, refer to the Network Status
Print printed in "Checking the Operations with Network Status Print" (p. 2-57) or
ask an administrator of the printer.
Enter "root" as the user name, then press the [ENTER] key on
your keyboard.
If a password is specified for the printer, enter the password. If the password has
not been specified yet, do not enter the password, but press the [ENTER] key on
your keyboard.
NOTE
You can log in by entering a name other than "root" (or leaving the field blank). In
this case, you can perform operations other than settings.