7
Click [OK].
Checking the Security Access Logs
If you have restricted the users who can print, who can monitor/change the settings
using the SNMP protocol, or who can perform the multicast discovery in [IP
Address Range Settings], you can check the security access logs (The date and
time when the access was locked, IP address, port number, and restriction type)
that are obtained when access from a restricted user is blocked. It also allows you
to [Save] or [Clear] the security access logs.
1
Run the web browser, enter the following URL in [Location] or
[Address], and then press the [ENTER] key on your keyboard.
http://<the IP address or name of the printer>/
Input Example : http://192.168.0.215/
Managing the Printer Using the Remote UI
3
3-33