Restricting the Users Who Can Perform the Multicast
Multicast discovery is a function that searches for certain devices using the service
location protocol (SLP). By using the multicast discovery function, you can search for
only the devices whose values in [Scope Name] are veriﬁed, using the service location
protocol (SLP) from utility software, such as NetSpot Device Installer and NetSpot
Managing the Printer Using the Remote UI
Run the web browser, enter the following URL in [Location] or
[Address], and then press the [ENTER] key on your keyboard.
http://<the IP address or name of the printer>/
Input Example : http://192.168.0.215/
Click [Log In].
If a password is speciﬁed for the printer, enter the password, and then click [Log In].
If the password has not been speciﬁed yet, it is not required to enter the password.