Managing the Printer Using the Remote UI
Specify the SNMPv1 protocol.
G When using the SNMPv1 protocol
Set [SNMPv1] to [On].
For [Access Rights], select in which mode the SNMPv1 agent can operate,
[Read-only] or [Read and Write].
Specify the community name of SNMP in [Community Name].
Selecting [Read-only] disables overwriting, and you cannot use some functions of
Canon utility software or cannot use the software properly due to an error
G When not using the SNMPv1 protocol
Set [SNMPv1] to [Off].
If [SNMPv1] is set to [Off], you may not be able to use Canon utility software.
Consult the administrator of the printer before selecting [Off].