Requisite Tasks Before Printing Or Managing The Printing Operation; Configuring The Printer To Print In A Network Environment - Canon LBP-3300 Network Manual

Requisite Tasks Before Printing or Managing the Printing
Operation
Configuring the Printer to Print in a Network Environment
1
The following shows the tasks that should be performed after installing the printer
and optional network board.
NOTE
For details on the procedure for installing the network board, see "User's Guide".
I Installing the Printer Driver
* There are two ways to install the printer driver.
The procedures for setting the IP address or creating a port vary depending on the installation method.
<Setting Up
Automatically>
Installing from
CD-ROM Setup (See
∗ You can set the IP
address, create a
port, and install the
printer driver at once.
1-2

Requisite Tasks Before Printing or Managing the Printing Operation

IP Address Setting
Using NetSpot
Device Installer (See
p. 2-2)
<Setting Up Manually>
IP Address Setting
IP Address Setting
Using the ARP/PING
Command (See p.
p. 2-15) 2-22)
* If you are using
Windows XP Service
Pack 2 or another
operating system
equipped with
Windows Firewall, set
the IP address using
the ARP/PING
command.
Creating a Port
Installing Canon CAPT Print Monitor Using Print Monitor
Installer (See p. 2-26)
Installing the Printer Driver
Installing the Printer Driver from [Add Printer Wizard] (See
p. 2-31)
IP Address Setting
Using the Printer
Status Window (See
p. 2-24)
* You can set the IP
address from the
Printer Status
Window if the printer
driver has already
been installed by the
USB connection.