Download  Print this page

Installing The Printer Driver Manually Using Various Utility Software - Canon LBP-3300 Network Manual

Laser beam printer.
Hide thumbs

Advertisement

Installing the Printer Driver Manually Using Various Utility
Software
This section describes the procedures for installing the printer driver manually
using various utility software. Before installing the printer driver from [Add Printer
Wizard], you need to set the IP address and create a port (Canon CAPT Port) in
order to configure the environment in which the printer and computer you are using
can correspond to each other as shown in the following figure. Install the printer
driver after configuring the network environment, following the procedure described
2
in the figure.
IP Address Setting Using
NetSpot Device Installer
2-14
Installing the CAPT Software
(See p. 2-15)
Installing Canon CAPT Print Monitor Using Print Monitor
Installing the Printer Driver from [Add Printer Wizard] (See
IP Address Setting
IP Address Setting
Using the ARP/PING
Command (See p. 2-22)
* If you are using Windows
XP Service Pack 2 or
another operating
system equipped with
Windows Firewall, set
the IP address using the
ARP/PING command.
Creating a Port
Installer (See p. 2-26)
Installing the Printer Driver
p. 2-31)
IP Address Setting Using
the Printer Status Window
(See p. 2-24)
* You can set the IP address
from the Printer Status
Window if the printer driver
has already been installed
by the USB connection.

Advertisement

Table of Contents

   Related Manuals for Canon LBP-3300

This manual is also suitable for:

Laser shot lbp5000

Comments to this Manuals

Symbols: 0
Latest comments:
  • ram Dec 14, 2014 12:43:
    how to sharing canon printer LBP 3300