6
Specify the SNMPv3 protocol.
G When using the SNMPv3 protocol
❑
Set [SNMPv3] to [On].
❑
Specify the authentication key or privacy key to be used in SNMPv3 in
[Authentication Key/Privacy Key].
❑
Enter the administrator password for the Remote UI in [Administrator
Password].
IMPORTANT
If the settings for the SNMPv3 protocol is specified using application other than the
Remote UI, the settings are not displayed in the Remote UI. To display the settings
again, reset the network board to the default settings. For details on the procedure
for resetting the print server to the default settings, see "Initializing the Network
Settings," on p. 5-8.
NOTE
•
The user name to be used for the SNMPv3 protocol is set to "initial".
•
If the password for the Remote UI is not specified, it is not required to enter a
password in [Administrator Password].
G When not using the SNMPv3 protocol
❑
Set [SNMPv3] to [Off].
Managing the Printer Using the Remote UI
3
3-13