Canon LBP-3300 Network Manual page 26

2
11
2-8 Installing the CAPT Software
[Get automatically]: Obtain an IP address using DHCP (The DHCP server
needs to be started up). For more details on configuring the DHCP server, ask
your network administrator.
[Use the following IP address]: Specify the IP address directly (Enter the IP
address by separating the numbers with a period (.), for example,
AAA.BBB.C.DD).
NOTE
If the printer to be installed is not displayed in [Printer List], perform the following
settings:
- Click [Update Printer List]. The printers on the network are searched for again.
- Click [Search by IP Address]. By entering the IP address of the printer to be
installed in the displayed [Search by IP Address] dialog box and clicking [OK], the
printer that has the entered IP address is searched for (Enter the IP address by
separating the numbers with a period (.), for example, AAA.BBB.C.DD).
Click [OK].
If you are using Windows XP Service Pack 2 or another operating system
equipped with Windows Firewall, and the Windows Firewall is enabled, click
[Yes] when the following screen is displayed.
A port (Canon CAPT Port) is created automatically.