12
2
The protocol settings for the printer are now completed.
Protocol Settings Using NetSpot Device Installer
NetSpot Device Installer allows you to perform the basic protocol settings. When
configuring the DNS server etc., use the Remote UI or FTP Client.
IMPORTANT
If you are using Windows XP Service Pack 2 or another operating system equipped with
Windows Firewall, and the Windows Firewall is enabled, you cannot search for the
printers on a subnet that is different from the one that the computers using NetSpot
Device Installer are on. To search for a printer on a subnet that is different from the one
that the computer you are using is on, see Readme of NetSpot Device Installer and add
"NetSpot Device Installer" to the [Exceptions] sheet in the [Windows Firewall] dialog box.
2-70
Protocol Settings for the Printer
When the following screen is displayed, click [Reset] to reset
the network board.
After completing the reset of the network board, the settings are effective.
NOTE
The settings also become effective by restarting the printer (Turn OFF the printer
once, wait for 10 seconds or longer, and then turn it ON).