Installing the CAPT Software
The TCP/IP port on the network is searched, and the printer is detected
If you are using Windows XP Service Pack 2 or another operating system
equipped with Windows Firewall, and the Windows Firewall is enabled, the
following screen is displayed.
If the IP address of the printer has been already set, click [No].
If you want to clear the block and detect the printers in which the IP address has
not been set yet, click [Yes].
If you want to specify the IP address in advance, cancel the installation, and see
"Installing the Printer Driver Manually Using Various Utility Software" (p. 2-14) to
specify the IP address.
Select the printer to be installed from [Printer List], then click
[Add to the Printer List for Driver Installation].
If the printer to be installed is not displayed in [Printer List], make sure that the
computer and printer are connected via the network and that the printer is ON.
G When the name of this printer is displayed in [Device Name]
Select the printer to be installed, then click [Add to the Printer List for Driver