Initializing The Network Settings - Canon LBP-3300 Network Manual

f f f f [Security Access Log]
Displays the obtained security access logs. The date and time when the
access was locked, IP address, port number, restriction type (any one of
[PRINT] (Rejected TCP/IP Print Jobs), [SNMP] (Rejected SNMP Monitoring/
Setting Changes), or [SLP] (Rejected Multicast Discoveries)) are displayed.
NOTE
Up to 100 logs can be obtained. When the number of the logs exceeds 100, the
logs are deleted starting from the oldest one.

Initializing the Network Settings

If you want to reset the network board to the default values, use any method from
among Remote UI, FTP Client, and NetSpot Device Installer.
This section describes the procedure for initializing the network settings using the
Remote UI. For details on initializing the network settings using FTP Client or
NetSpot Device Installer, see "Initializing the Network Settings," on p. 5-8.
IMPORTANT
Make sure that the printer is not operating before initializing the network settings. If you
initialize the print server while the printer is printing or receiving data, the received data
may not be printed properly, or may result in paper jams or damage to the printer.
1
Run the web browser, enter the following URL in [Location] or
[Address], and then press the [ENTER] key on your keyboard.
http://<the IP address or name of the printer>/
Input Example : http://192.168.0.215/
Managing the Printer Using the Remote UI
3
3-37