Canon LBP-3300 Network Manual page 85

9
Specify [SNTP] when using SNTP Client to obtain the time.
G If you have specified the settings for DNS in Step 7
❑
Enter the server name of the SNTP server in [SNTP Server Name].
❑
Select [Time Zone].
❑
To set daylight saving time, set [Daylight Saving Time] to [On].
G If you have not specified the settings for DNS in Step 7
❑
Enter the IP address of the SNTP server in [SNTP Server Name].
❑
Select [Time Zone].
❑
To set daylight saving time, set [Daylight Saving Time] to [On].
NOTE
•
When you cannot use the SNTP server function, you can report the time set on the
computer to the printer using the following procedure. For details on the Printer
Status Window, see "User's Guide".
1. Display the Printer Status Window.
2. Select [Preferences] from the [Options] menu.
3. Set [Monitor Printer Status] in the [Preferences] dialog box to [Always], and
then select the [Notify the Printer of the Time] check box.
•
Time Zone: The standard time zones of the world are expressed globally in terms
of the difference in hours (± up to 12 hours) from GMT* (± 0 hours). A time zone is
a region throughout which this time difference is the same.
Protocol Settings for the Printer
2
2-67