Canon LBP-3300 Network Manual page 21

1
Make sure that the computer and printer are connected via the
network and that the printer is ON.
2
Turn the computer on and start up Windows.
NOTE
If you are using Windows 2000/XP/Server 2003, be sure to log on as a member of
Administrators when starting up.
3
Insert the supplied CD-ROM into the CD-ROM drive.
If the CD-ROM is already in the drive, eject the disk and re-insert it into the drive.
IMPORTANT
If CD-ROM Setup does not appear, select [Run] from the [Start] menu, enter
"D:\English\MInst.exe", and then click [OK]. (The CD-ROM drive name is indicated
as "D:" in this manual. The CD-ROM drive name may differ depending on the
computer you are using.)
4
Click [Easy Installation] or [Custom Installation].
[Easy Installation] allows you to install the printer driver and the instruction
manuals simultaneously. If you do not install the manuals, select [Custom
Installation].
Installing the CAPT Software
2
2-3