6
Perform the protocol settings.
Options to be specified
[IP Address Setting with]:
[IP Address]:
[Subnet Mask]:
[Gateway Address]:
NOTE
•
If RARP, BOOTP, or DHCP is selected, you cannot enter any value in [IP Address],
[Subnet Mask], and [Gateway Address].
•
If you cannot use RARP, BOOTP, and DHCP, specify [Manual Setting].
Select the method for setting the IP address.
[Manual
Allows you to specify the IP address
Setting]:
directly. The IP address entered for [IP
Address] is specified for the network board.
[Auto Detect]: Obtains an IP address using RARP,
BOOTP, or DHCP.
[RARP]:
Obtains an IP address using RARP. (The
RARP daemon needs to be started up.)
[BOOTP]:
Obtains an IP address using BOOTP. (The
BOOTP daemon needs to be started up.)
[DHCP]:
Obtains an IP address using DHCP. (The
DHCP server needs to be started up.)
Enter the IP address of the network board.
Enter the subnet mask that is being used on the TCP/IP
network.
Enter the gateway address that is being used on the TCP/IP
network.
Protocol Settings for the Printer
2
2-73