Canon LBP-3300 Network Manual page 86

10
2
2-68 Protocol Settings for the Printer
*The time at the Greenwich Observatory in England is called GMT (Greenwich Mean Time).
•
Daylight Saving Time: In some countries and regions, time is advanced throughout
the summer season. The period in which this is applied is called "Daylight Saving
Time."
Specify the settings for [Multicast Discovery Settings].
NOTE
Multicast discovery is a function that searches for certain devices using the service
location protocol (SLP). By using the multicast discovery function, you can search
for only the devices whose values in [Scope Name] are verified, using the service
location protocol (SLP) from utility software, such as NetSpot Device Installer and
NetSpot Console.
G When setting the printer so that it responds to searches that used
the multicast discovery function
❑
Set [Response] to [On].
❑
In [Scope Name], enter the scope name to be used when searching for certain
devices from utility software, such as NetSpot Device Installer and NetSpot
Console, by multicast.
G When setting the printer so that it does not response to searches
that used the multicast discovery function
❑
Set [Response] to [Off].